Ultimate: The Ultimate File Image Viewer: Trouble Shooting

  1. When I open my image file, only a MBR tab is present:
    This could be one of a few things.
    1. If your image is a floppy disk image with no MBR, you need to close image. Then on the main dialog, check the "Force No MBR Presence" checkbox, and reload your image. This will not check for the MBR and parse your image as a single volume starting with LBA 0.
    2. If you know your image has a MBR but no partitions are being loaded, this probably means your MBR's Partition Table is empty, specifically the SYS ID field. make sure at least one of the partition entries is valid, hit "Apply" on that partition tab, then "Apply" on the MBR dialog, and reload your image.

  2. More to come. If you have an issue or a question, please let me know via the "Contact" link above.